top of page

DelVal · Authorised dealer

DelVal Series 7/8 Trunnion Mounted Ball Valve

The DelVal Series 7/8 is a trunnion mounted ball valve: Series 7 covers 2″ to 14″ (DN 50 to 350) and Series 8 covers 16″ to 24″ (DN 400 to 600), in Class 150 - 1500.

Authorised DelVal dealer · Mumbai · Since 1969

Size range
Series 7 - 2″ to 14″ (DN 50 to 350)Series 8 - 16″ to 24″ (DN 400 to 600)
Pressure rating
Class 150 - 1500 Full and Reduced Bores
Body type
Flanged (RF, RTJ), Buttweld
Design standard
API 6D, ASME B16.34

Overview

Unlike a floating ball, the ball in a trunnion mounted valve is held on a fixed axis by the stem above and a trunnion below. Line pressure is carried by those supports instead of forcing the ball onto the downstream seat, and the seats are pushed against the ball to seal. Operating torque therefore stays lower and steadier as size and pressure rise, which is why trunnion designs take over from floating balls in larger bores and higher classes.

DelVal splits the range by size, with Series 7 from 2″ to 14″ and Series 8 from 16″ to 24″, in full and reduced bores from Class 150 to 1500. Bodies are cast in carbon, stainless or duplex stainless steel with flanged RF or RTJ ends or buttweld ends. Standard seats are single piston effect on both sides for double block and bleed, with double piston effect options for DIB-1 and DIB-2. The fire safe design pairs a primary soft seal with a secondary metal seat and is the default build.

Specifications

Specifications
Body typeFlanged (RF, RTJ), Buttweld
BodyCS, SS, Duplex SS
BallCS + ENP, CF8M, CF3M, Duplex SS
Stem410 SS, 316 SS, 304 SS, XM-19, Duplex SS
SeatRTFE, PEEK, Devlon, Nylon, Viton
Seat sealHNBR, FKM
Size rangeSeries 7 - 2″ to 14″ (DN 50 to 350); Series 8 - 16″ to 24″ (DN 400 to 600)
Pressure ratingClass 150 - 1500 Full and Reduced Bores
Design standardAPI 6D, ASME B16.34
Testing standardAPI 6D, API 598, ISO 5208
Body material grades*ASTM A216 WCB, A352 LCB, A351 CF8M/CF8/CF3M, A995 4A/5A/6A, A105, A350 LF2, A182 F316/F304/F316L/F51/F53/F55
End connection standards*ASME B16.5, ASME B16.47 (flanged); ASME B16.25 (butt weld)

Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.

Design features

  • Cast body with ISO 5211 top plate for direct actuator mounting
  • Body joint sealed by O-rings plus a fire safe spiral wound gasket
  • O-ring stem seals with two pre-energised graphite seals for emission control
  • SPE x SPE seats (DBB) as standard; DPE x DPE (DIB-1) and SPE x DPE (DIB-2) available
  • Primary soft seal backed by a secondary metal seat for fire safety
  • Anti-blowout stem design
  • Fully machined body bore for lower flow resistance

Series in this family

Series in this family
SeriesSize range
72″ to 14″ (DN 50 to 350)
816″ to 24″ (DN 400 to 600)

Where it is used

Trunnion mounted ball valves are used on pipelines, manifolds and large process lines where pressure and bore would make a floating ball heavy to operate. DelVal's brochure data for this series names process on-off, oil and gas, chemicals, emergency shutdown, buried service, block and bypass, suction and discharge isolation, pig traps, surge relief skids, decoking isolation, metering stations and reinjection units. The SIL3 certificate DelVal lists for Series 7 and 8 is relevant to emergency shutdown duty.

  • Oil and gas pipelines
  • Refining
  • Gas metering
  • Petrochemicals
  • Chemicals
  • Power generation

Before you order

Seat arrangement: DBB or DIB

Single piston effect seats on both sides, DelVal's standard, give double block and bleed, and each seat relieves cavity pressure back to the line. Double piston effect seats seal against pressure from either side but need separate cavity relief; DelVal offers DPE x DPE (DIB-1) and SPE x DPE (DIB-2).

End connection and bore

Flanged RF suits most process pipework, RTJ facing is normally specified at higher classes, and buttweld ends suit welded or buried pipeline service. Decide too between full bore, which is needed where pigs pass through, and reduced bore, which is lighter and needs less actuator torque.

Confirm the size and class pairing

Series 7 stops at 14″ and Series 8 starts at 16″, so the line size settles the series. DelVal's published sources differ on the exact size and class envelope, so confirm the size and class combination against the current datasheet when you send the enquiry, before the line design is frozen.

Certificates DelVal lists

  • API 6D
  • ATEX 2014/34/EU
  • CRN (Series 7/8 trunnion mounted ball valves)
  • CE PED Module H
  • SIL3 (Series 7 and 8)
  • TR CU 032 (EAC)
  • API 6FA and API 607 fire safe

How to order from UEC

Send the details

Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.

We confirm and quote

UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.

Supply and documents

Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.

Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in

Questions buyers ask

Why choose a trunnion mounted valve instead of a floating ball valve?

As size and pressure increase, a floating ball is pushed harder into its seat and the torque needed to turn it climbs steeply. Supporting the ball on a trunnion keeps that load off the seats, so a smaller actuator can be used and seat wear is reduced.

Is the Series 7/8 fire safe as standard?

DelVal describes fire safe design as the default for this series, with NACE versions available. If the soft primary seal is destroyed in a fire, the secondary metal seat limits leakage. DelVal's earlier brochure data names API 6FA and API 607 as the fire test standards.

What do DIB-1 and DIB-2 mean?

DIB stands for double isolation and bleed. In DelVal's DIB-1 build both seats are double piston effect, so each can seal against pressure from either side; DIB-2 pairs one single and one double piston effect seat. The standard SPE x SPE build provides double block and bleed.

How does UEC quote for a Series 7/8 valve?

Trunnion valves vary widely in cost, because size, class, bore, body and trim materials, seat arrangement, end type and actuation all change the build. UEC does not publish prices; send a datasheet or line list and the quotation will be prepared against it.

DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.

bottom of page