top of page

DelVal · Authorised dealer

DelVal Series 2000 Shut Down Ball Valve

The DelVal Series 2000 is a threaded, full-port stainless steel ball valve built for shut-down duty, offered in 1/2″, 1″ and 2″ sizes with a 2000 psi pressure rating.

Authorised DelVal dealer · Mumbai · Since 1969

Size range
1/2″, 1″, 2″
Pressure rating
2000 psi
Body type
Threaded
Design standard
API 608, ASME B16.34

Overview

Series 2000 is DelVal's small-bore valve for shut-down service. The body is CF8M stainless steel with a seal welded joint, so there is no bolted body connection to maintain, and the ends are threaded with a full port. The floating ball and the stem are both 316 stainless steel, the seat is RTFE, and the stem is retained so that it cannot blow out under pressure.

What sets this series apart from DelVal's other threaded valves is the top of the valve. An integral top plate allows an actuator to be mounted directly, and the plate is left open so that any leakage past the stem packing can be seen. The packing itself is adjustable. DelVal lists fire testing and certification to API 607, 6th edition, and conformity to ANSI/NACE MR0175/ISO15156, with design to API 608 and ASME B16.34 and testing to API 598.

Specifications

Specifications
Body typeThreaded
BodySS
BallSS
StemSS
SeatRTFE
Size range1/2″, 1″, 2″
Pressure rating2000 psi
Design standardAPI 608, ASME B16.34
Testing standardAPI 598

Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.

Design features

  • Rated 2000 PSIG WOG
  • Integral top plate for mounting an actuator directly
  • Top plate left open so stem leakage can be detected
  • Seal welded CF8M stainless steel body
  • Full port with threaded ends
  • 316 stainless steel ball and stem
  • Floating ball, blowout-proof stem and adjustable packing
  • Fire tested and certified to API 607, 6th edition; conforms to ANSI/NACE MR0175/ISO15156

Where it is used

A shut-down valve closes a line on command, usually from a trip signal, to isolate equipment when a process limit is exceeded. Small threaded valves of this kind are typically placed on instrument and impulse lines, sampling points, chemical injection and dosing connections, and gas or hydraulic take-offs on skids. The fire tested build and NACE conformity stated by DelVal make the Series 2000 a candidate for hydrocarbon and sour service, subject to the plant's own material and safety specifications.

  • Oil and gas production
  • Refining
  • Petrochemicals
  • Gas processing
  • Chemical processing
  • Power generation utilities

Before you order

Size and port

Only three sizes are listed: 1/2″, 1″ and 2″. Because the port is full bore, the valve can be matched to the line size without creating a restriction, which matters on sampling and impulse lines where flow is small but should not be throttled. State the thread type your piping uses on the enquiry so the ends are confirmed before supply.

Actuation and fail position

Most shut-down duties need the valve to move to a defined safe position on loss of signal or air. The integral top plate takes a direct-mounted actuator, so decide whether you need spring-return or double-acting operation, the supply pressure available and whether position feedback is wanted. Those details let the valve and actuator be quoted together.

Sour or fire-exposed service

If the line carries hydrogen sulphide or sits in a fire zone, say so at enquiry. DelVal offers firesafe and NACE versions, and NACE conformity depends on the materials of the build actually supplied, so the requirement belongs on the purchase order line rather than being assumed.

Certificates DelVal lists

  • API 607, 6th edition (fire tested and certified)
  • ANSI/NACE MR0175/ISO15156 (conformity)

How to order from UEC

Send the details

Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.

We confirm and quote

UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.

Supply and documents

Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.

Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in

Questions buyers ask

What pressure is the Series 2000 rated for?

DelVal rates it at 2000 psi, given as 2000 PSIG WOG in the feature list. WOG refers to water, oil and gas service, so for hot service the allowable pressure should be checked against the pressure-temperature limits of the body and RTFE seat on the datasheet.

Why is the top plate left open?

An open top plate lets anyone inspecting the valve see whether fluid is escaping past the stem packing, rather than having it hidden under a closed mounting. On a shut-down valve that may sit untouched for months, early sight of a packing leak gives time to adjust the packing before it grows.

Can the Series 2000 be repaired in the field?

The body joint is seal welded, so the valve is not designed to be opened up for seat replacement in the way a three-piece valve is. The stem packing can be adjusted. Where frequent seat renewal is expected, a three-piece design such as the DelVal Series 64 is the usual alternative.

How is a Series 2000 valve priced?

UEC does not publish prices. The cost of a Series 2000 depends on the size, the pressure class, the body, ball and seat materials, the end connection and whether an actuator is included. Send those details through the enquiry form and UEC will quote against them.

DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.

bottom of page