top of page

DelVal · Authorised dealer

DelVal Series 65-72 Floating Ball Valve

The DelVal Series 65-72 is a family of flanged floating ball valves with raised face ends, covering 1/2″ to 12″ (DN 15 to 300, varying by series) in Class 150, 300, 600 and 900.

Authorised DelVal dealer · Mumbai · Since 1969

Size range
1/2″ to 12″ (DN 15 to 300) varies by series
Pressure rating
Series 65/69 – Class 150Series 66/70 – Class 300Series 67/71 – Class 600Series 68/72 – Class 900
Body type
Flanged RF
Design standard
BS EN 17292, ASME B16.34

Overview

In a floating ball valve the ball sits between two seats and is free to shift slightly downstream under line pressure, which presses it against the outlet seat to make the seal. The Series 65-72 applies that principle to a flanged body with raised face ends, and divides the range into eight series numbers by pressure class, from Class 150 for Series 65 and 69 up to Class 900 for Series 68 and 72.

Bodies are in carbon or stainless steel. Ball options are CF8M, CF8, CF3M and CF3, stems are 316 SS, Duplex S31803 or 17-4 PH, and the seat list is broad: PTFE, RTFE, PEEK, Delrin, Devlon, Nylon and Ultra. Seats are contoured to prevent extrusion and relieve cavity pressure as standard, the stem packing is live-loaded graphite, and an anti-static device links ball, stem and body. Firesafe and NACE versions are offered.

Specifications

Specifications
Body typeFlanged RF
BodyCS, SS
BallCF8M, CF8, CF3M, CF3
Stem316 SS, Duplex S31803, 17-4 PH
SeatPTFE, RTFE, PEEK, Delrin, Devlon, Nylon, Ultra
Size range1/2″ to 12″ (DN 15 to 300) varies by series
Pressure ratingSeries 65/69 – Class 150; Series 66/70 – Class 300; Series 67/71 – Class 600; Series 68/72 – Class 900
Design standardBS EN 17292, ASME B16.34
Testing standardISO 5208
Body material grades*ASTM A216 WCB/WCC; ASTM A352 LCB/LCC; ASTM A351 CF8M

Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.

Design features

  • ISO 5211 top plate for direct actuator mounting
  • Contoured seats that do not extrude
  • Packing gland stays fully adjustable with the actuator fitted
  • Live-loaded graphite stem packing
  • Blowout-proof stem
  • Anti-static device at the ball-to-stem and stem-to-body connections
  • Self-relieving seats as standard

Series in this family

Series in this family
SeriesPressure rating
65 and 69Class 150
66 and 70Class 300
67 and 71Class 600
68 and 72Class 900

Where it is used

Flanged floating ball valves are the everyday on-off valve of process plants in small and medium sizes, where a quarter turn gives tight shut-off and the flanged body bolts into standard pipework. DelVal's brochure data for this family lists chemical, petrochemical, pulp and paper, reactive monomer, oil and gas production, steam and hot gas duty. The SIL3 and ATEX certificates DelVal lists are relevant where the valve forms part of a safety instrumented function or sits in a hazardous area.

  • Chemicals
  • Petrochemicals
  • Pulp and paper
  • Oil and gas production
  • Steam and hot gas systems
  • Polymer and monomer plants

Before you order

Match the series number to the class

Each pair of series numbers corresponds to one pressure class, so the series on the order fixes the flange rating. Take the class from your piping specification and the series follows, from 65 or 69 at Class 150 to 68 or 72 at Class 900. DelVal's page does not say what separates the two numbers in each pair, so confirm that against the datasheet when ordering.

Seat material

The seat is the main choice among seven listed materials. PTFE and RTFE suit general chemical service; PEEK and Devlon are harder and are usually considered for higher temperatures or for media that would deform a soft seat; Delrin and Nylon are often used on gas and higher-pressure duty. Give the medium, temperature range and cycling rate on your enquiry.

Size availability by series

The 1/2″ to 12″ (DN 15 to 300) span varies by series, so the full size range should not be assumed to apply in every class. Check the required size against the specific series and class you need before the line design is fixed around it.

Certificates DelVal lists

  • API 6D
  • ATEX 2014/34/EU
  • CRN (Series 65-72 floating ball valves)
  • NSF-61 and 372 (certificate names Series 65/66 and 69/70)
  • CE PED Module H
  • SIL3 (Series 65-72)
  • TR CU 032 (EAC)

How to order from UEC

Send the details

Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.

We confirm and quote

UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.

Supply and documents

Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.

Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in

Questions buyers ask

What is the difference between Series 65 and Series 68?

The number indicates the pressure class. Series 65 is Class 150, 66 is Class 300, 67 is Class 600 and 68 is Class 900; the numbers 69 to 72 repeat the same four classes. Flange rating and body proportions change with class, so a Class 900 valve is not a drop-in replacement for a Class 150 one.

Does the valve vent pressure trapped in the body cavity?

Yes. DelVal fits self-relieving seats as standard on this family. If liquid trapped in a closed valve warms and expands, the seat lets the excess pressure pass back into the pipe instead of loading the body. This matters on liquids such as LPG or solvents that may be shut in and heated by the sun.

Is the Series 65-72 suitable for a safety instrumented system?

DelVal lists a SIL3 certificate for Series 65-72 floating ball valves. The certificate supports use in a safety function, but the SIL achieved depends on the whole loop, including actuator, solenoid valve and logic solver, and on the proof test interval. State the SIL requirement on your enquiry.

Can it be fitted with an actuator?

The top plate is drilled to ISO 5211 for direct mounting, so a pneumatic or electric actuator can be bolted on, and the packing gland can still be adjusted with the actuator in place. DelVal also sells the Class 150 Series 65 and 69 as a ready-automated package under Series D65/D69.

DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.

bottom of page