DelVal · Authorised dealer
DelVal Series 25 Pneumatic Scotch Yoke Actuator
The DelVal Series 25 is a pneumatic scotch yoke actuator for larger quarter-turn valves, with rated torque to 240,101 inch/lbs (27,128 Nm) and a spring cartridge that allows conversion from double acting to spring return.
Authorised DelVal dealer · Mumbai · Since 1969
- Rated torque
- To 240,101 inch/lbs (27,128 Nm)
- Configuration
- DA to SR conversion by changing cylinder and spring cartridge assembly
- Mounting
- Hollow drive with universal adapter insert
- Certifications
- ATEX 2014-34-EU, SIL3
Overview
In a scotch yoke actuator the piston drives a slotted yoke on the output shaft rather than a gear. The lever arm is longest at the ends of the stroke, which is where quarter-turn valves usually need the most torque to unseat and reseat. DelVal rates the Series 25 up to 240,101 inch/lbs (27,128 Nm).
The brochure gives ductile iron for the body, housing top cover and both end plates. A unit can be changed from double acting to spring return by swapping the cylinder and spring cartridge assembly, and the cartridge is designed so that the spring can be assembled and removed safely. Piston guide bands and quad seals keep guidance rigid and friction low, and the hollow drive takes a universal adapter insert for direct mounting on the valve.
Specifications
| Type | Pneumatic scotch yoke, quarter-turn |
|---|---|
| Rated torque | To 240,101 inch/lbs (27,128 Nm) |
| Configuration | DA to SR conversion by changing cylinder and spring cartridge assembly |
| Spring cartridge | Safe spring cartridge design for safe assembly and disassembly |
| Piston guidance | Piston guide bands and quad seals |
| Drive | Hollow design with universal adapter insert for direct mounting to quarter-turn valves |
| Body, housing top cover, end plates* | Ductile iron |
| Testing standard* | AWWA-C-540 |
| Mounting* | ISO 5211 |
Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.
Design features
- Rated torque up to 240,101 inch/lbs (27,128 Nm)
- Converts from double acting to spring return by changing the cylinder and spring cartridge
- Spring cartridge built for safe assembly and removal
- Guide bands and quad seals on the piston for rigid, low-friction travel
- Hollow drive with a universal adapter insert
Where it is used
Scotch yoke actuators take over where a rack and pinion unit would have to be very large, typically on big butterfly valves and trunnion mounted ball valves in pipelines, cooling water circuits and pumping stations. DelVal lists ATEX 2014-34-EU and SIL3 certificates for this series, which matters on emergency isolation and shutdown valves in classified areas.
- Oil and gas
- Power generation
- Water transmission and pumping
- Mining
- Chemical process
- Marine
Before you order
Match the torque curve, not just the peak
A scotch yoke gives its highest output at the start and end of the stroke and less at mid-travel. Check that actuator output at each point exceeds the valve requirement at minimum air pressure, and at the spring end for spring return. Give UEC the valve torque data, or its make, series, size and class.
Decide double acting or spring return
Double acting units need air to move in both directions; spring return units move to a set position when air is lost. Because DelVal allows conversion by changing the cylinder and spring cartridge, state the fail action you need now and whether a change is likely later.
Confirm the adapter for the valve
Mounting is to ISO 5211 through a universal adapter insert in the hollow drive. Note the valve flange code and the stem shape and size, especially when the actuator is going onto a valve already in service, so the right insert is supplied the first time.
Certificates DelVal lists
- ATEX 2014-34-EU (valves and actuators)
- SIL3 (Series 25 scotch yoke actuator)
- CE (ATEX)
How to order from UEC
Send the details
Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.
We confirm and quote
UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.
Supply and documents
Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.
Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in
Questions buyers ask
What is the maximum torque of the DelVal Series 25?
DelVal's product page rates the Series 25 to 240,101 inch/lbs (27,128 Nm). Because output varies through the stroke and with air pressure and spring choice, the exact model for your valve is confirmed against the order-specific data sheet in UEC's quotation.
Can a double acting Series 25 be converted to spring return later?
Yes. DelVal designed the Series 25 so that it changes from double acting to spring return by replacing the cylinder and spring cartridge assembly. The cartridge is built for safe assembly and disassembly, so the spring is contained during the change.
What is the Series 25 body made of?
The DelVal brochure gives ductile iron for the body, the housing top cover and the left and right end plates, and lists testing to AWWA-C-540. If your specification calls for a different housing material or coating, raise it at enquiry so it can be checked with DelVal.
What does UEC need to quote a Series 25?
Send the valve details or its torque values, the minimum air supply pressure, the required fail action, the solenoid and switch accessories and any certificate requirements. The price depends on these, as well as on the valve when both are bought together, and UEC quotes against them.
DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.
