top of page

DelVal · Authorised dealer

DelVal Series 4 TriO Triple Offset Valve

The Series 4 TriO is DelVal's triple offset, metal seated butterfly valve, offered in Class 150, 300 and 600 with wafer, lug, double flanged and buttweld bodies, and with a fire-safe design as standard.

Authorised DelVal dealer · Mumbai · Since 1969

Size range
Series 4A, 4B, 4C, 4W – 3″ to 48″ (DN 80 to 1200)Series 4D, 4E, 4F, 4Y, 4G, 4H, 4J, 4K – 3″ to 24″ (DN 80 to 600)
Pressure rating
Series 4A, 4B, 4C, 4W – Class 150Series 4D, 4E, 4F, 4Y – Class 300Series 4G, 4H, 4J, 4K – Class 600
Body type
Wafer, Lug, Double Flanged, Buttweld
Seat
Stellite Gr.21

Overview

A triple offset valve adds a third, angular offset to double offset geometry, so the conical sealing faces of disc and seat meet only at closure and do not rub during travel. That makes a metal-to-metal seal workable without the friction that would wear it in a concentric design. In the TriO, the seat is a hard-faced Stellite Gr.21 surface integral to the one-piece body, and the sealing element is a replaceable laminated seal ring mounted on the disc, precision machined to seal in both directions.

A retainer made of the same metal as the disc clamps the seal ring rigidly to the disc face. Seal ring options are S31803, XM 19 or Inconel 625, each laminated with graphite, or a solid metal seat. The single-piece stem runs in nitrided SS316 bearings with graphite rings, designed for high radial and axial loads and to keep dirt out, and its packing is live loaded by Belleville springs under a rocker-shaped gland bridge.

Specifications

Specifications
Body typeWafer, Lug, Double Flanged, Buttweld
BodyCS, SS
DiscWCB, CF8M, CF8
Stem316 SS, 410 SS, 17-4 PH, XM-19
SeatStellite Gr.21
Seal ringS31803+Graphite, XM 19+Graphite, Inconel 625+Graphite, Solid Metal Seat
Size rangeSeries 4A, 4B, 4C, 4W – 3″ to 48″ (DN 80 to 1200); Series 4D, 4E, 4F, 4Y, 4G, 4H, 4J, 4K – 3″ to 24″ (DN 80 to 600)
Pressure ratingSeries 4A, 4B, 4C, 4W – Class 150; Series 4D, 4E, 4F, 4Y – Class 300; Series 4G, 4H, 4J, 4K – Class 600
Design standardAPI 609 Category B, BS EN 593
Testing standardAPI 598, BS EN 12266-1
VersionsDefault firesafe design and NACE versions available
Body material grades*WCB / WCC / LCC / CF8 / CF8M / Gr 4A / Gr 5A / Gr 6A

Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.

Design features

  • Hard-faced Stellite Gr.21 seat integral to the body
  • Replaceable laminated seal ring on the disc, machined for bi-directional sealing
  • Seal ring retainer in the same metal as the disc
  • Fire-safe design as standard; NACE versions available
  • Nitrided SS316 bearings with graphite rings for radial and axial stem loads
  • Belleville-spring live-loaded packing with rocker-shaped gland bridge
  • Single-piece stem and one-piece body
  • ISO 5211 top plate for actuators and gears

Series in this family

Series in this family
SeriesPressure ratingSize range
4A, 4B, 4C, 4WClass 1503″ to 48″ (DN 80 to 1200)
4D, 4E, 4F, 4YClass 3003″ to 24″ (DN 80 to 600)
4G, 4H, 4J, 4KClass 6003″ to 24″ (DN 80 to 600)

Where it is used

Triple offset valves are typically chosen for tight shutoff where temperature, pressure or the medium rule out soft seats: steam and condensate systems, boiler and turbine auxiliaries, hydrocarbon process isolation, hot gases, and lines with fire-safe requirements. The Class 600 range and buttweld body option suit high-integrity process piping. DelVal also lists a SIL3 certificate covering its triple and double offset butterfly valves, and an NSF-61/372 certificate for Series 4A to 4F.

  • Oil and gas
  • Refining and petrochemicals
  • Power generation
  • Chemical processing
  • Steel and metals

Before you order

Class and size together

The size ceiling depends on the class. Class 150 series (4A, 4B, 4C, 4W) run from 3″ to 48″ (DN 80 to 1200), while the Class 300 (4D, 4E, 4F, 4Y) and Class 600 (4G, 4H, 4J, 4K) series stop at 24″ (DN 600). Settle the class from the piping specification, then confirm the series code and body type for your size.

Seal ring material

The laminated seal ring is the part that meets the seat at closure. S31803 duplex, XM 19 and Inconel 625 graphite laminates differ in corrosion and temperature resistance, and a solid metal seat is listed where a graphite laminate is not wanted. Give the fluid, temperature range and shutoff requirement so the ring can be selected against DelVal's datasheet.

Certificates DelVal lists

  • API 609 (butterfly valves)
  • ATEX 2014/34/EU (valves and actuators)
  • CRN (Series 4 TriO triple offset valves)
  • NSF-61/372 (Series 4A-4F TriO)
  • CE PED Module H (ball and butterfly valves)
  • SIL3 (triple and double offset butterfly valves)
  • TR CU 032 certificate and declaration (ball and butterfly valves)

How to order from UEC

Send the details

Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.

We confirm and quote

UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.

Supply and documents

Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.

Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in

Questions buyers ask

Why choose the TriO over DelVal's double offset Series 44-49?

Series 44-49 offers soft, fire-safe and metal seats in Class 150 and 300. The TriO is metal seated only and uses triple offset geometry, in which disc and seat meet without rubbing, and it extends to Class 600. It is the usual pick where temperature or fire-safety requirements rule out polymer seats.

Is the seal ring replaceable?

Yes. DelVal places a replaceable laminated seal ring on the disc, clamped by a retainer made of the same metal as the disc, while the Stellite seat is integral to the body. Quote the series code and seal ring material when asking about a replacement ring.

Which pressure classes and standards apply to the TriO?

Class 150 (Series 4A, 4B, 4C, 4W), Class 300 (Series 4D, 4E, 4F, 4Y) and Class 600 (Series 4G, 4H, 4J, 4K). DelVal designs the valve to API 609 Category B and BS EN 593 and tests it to API 598 and BS EN 12266-1.

What decides the price of a TriO valve?

Triple offset valves vary widely with class, size, body type (wafer, lug, double flanged or buttweld), body, disc and seal ring materials, NACE requirements and the actuator. UEC quotes against these details for each enquiry and does not publish list prices.

DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.

bottom of page