top of page

DelVal · Authorised dealer

DelVal Series 58 Double Flanged Butterfly Valve

The Series 58 is DelVal's double flanged butterfly valve with a resilient seat for higher pressures, covering 2″ to 48″ (DN 50 to 1200): 285 PSIG (PN 20) up to 24″ and 230 PSIG (PN 16) from 26″ to 48″.

Authorised DelVal dealer · Mumbai · Since 1969

Size range
2″ to 48″ (DN 50 to 1200)
Pressure rating
2″ to 24″ – 285 PSIG (PN 20)26″ to 48″ – 230 PSIG (PN 16)
Body style
Series 58 – Double Flanged
Seat
EPDM, Buna-N, FKM

Overview

Series 58 is a single series with one body style: double flanged, meaning the valve has a flange of its own at each end and is bolted to each mating pipe flange separately rather than clamped between them. That arrangement lets the body carry pipe loads, makes it practical as an isolation point at the end of a run or beside equipment, and avoids having to centre a large wafer between flanges. The internal design and material options DelVal lists for it match those of its wafer and lug Series 56/57.

Inside, upper and lower stems engage the disc through a square or double-D drive, eliminating disc screws and taper pins, and Bear-G bearings at each stem end cut friction while keeping the stem off the body. A heavy-duty bushing absorbs the load that line pressure places on the disc-stem assembly. Bodies are offered in cast iron, ductile iron, carbon steel or stainless steel, discs in coated ductile iron, CF8M or NAB, and seats in EPDM, Buna-N or FKM.

Specifications

Specifications
Body styleSeries 58 – Double Flanged
BodyCI, DI, CS, SS
DiscNylon coated Ductile Iron, Aroxy Ductile Iron, CF8M, NAB
Stem410 SS, 17-4 PH, 316 SS
SeatEPDM, Buna-N, FKM
Size range2″ to 48″ (DN 50 to 1200)
Pressure rating2″ to 24″ – 285 PSIG (PN 20); 26″ to 48″ – 230 PSIG (PN 16)
Design standardAPI 609, BS EN 593
Testing standardAPI 598, BS EN 12266-1
Body material grades*ASTM A126 Class-B / ASTM A395 60-40-18 / ASTM A216 WCB / ASTM A351 CF8M/CF3M

Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.

Design features

  • Double flanged body that bolts to each pipe flange
  • Rated 285 PSIG (PN 20) to 24″ and 230 PSIG (PN 16) for 26″ to 48″
  • Square or double-D drive on upper and lower stems, with no taper pins or disc screws
  • Bear-G bearings at drive and non-drive ends
  • Heavy-duty bushing carrying pressure loads on the disc-stem assembly
  • Double moulded O-ring secondary seals plus a bi-directional U-cup stem seal
  • Polished disc edge and hubs, with a NAB disc option
  • Actuators, handles and gears mount directly on the ISO 5211 top plate

Where it is used

Double flanged butterfly valves are the common choice in pump houses, treatment plants and distribution chambers, where valves are installed between flanged spools, often in large sizes, and may have to serve as the isolation point at the end of a pipe run. With ratings up to 285 PSIG (PN 20), Series 58 also fits pressurised transmission and cooling water systems. DelVal's brochure additionally lists CRN, DNV GL type approval, WRAS and UL 1091 for this series.

  • Water and wastewater treatment
  • Pumping stations
  • Power generation
  • Marine
  • Desalination
  • Steel plants

Before you order

Face-to-face length and flange drilling

Compare the valve's face-to-face length and flange drilling with the space and flanges on your drawing before ordering, because a double flanged valve cannot be adjusted between flanges the way a wafer can. Tell us the flange standard and class your piping uses, and UEC will confirm the matching Series 58 configuration against DelVal's datasheet.

Rating above 24 inches

Series 58 valves from 26″ to 48″ are rated 230 PSIG (PN 16), not 285 PSIG (PN 20). On a large-bore line designed for PN 20, this needs settling with the pipeline designer at the specification stage rather than discovering it at site.

Certificates DelVal lists

  • API 609 (butterfly valves)
  • CE PED Module H (ball and butterfly valves)
  • CRN, DNV GL type approval, WRAS and UL 1091 (listed in DelVal's brochure)

How to order from UEC

Send the details

Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.

We confirm and quote

UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.

Supply and documents

Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.

Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in

Questions buyers ask

Does Series 58 come in wafer or lug versions?

No. Series 58 is double flanged only. If you need the same pressure ratings and material options in a shorter body, DelVal makes Series 56 (wafer) and Series 57 (lug), which cover the same 2″ to 48″ (DN 50 to 1200) range.

What pressure can a 30-inch Series 58 valve take?

Sizes from 26″ to 48″ are rated 230 PSIG (PN 16), so a 30″ valve falls in that band. Valves from 2″ to 24″ carry the higher 285 PSIG (PN 20) rating. If your system design pressure is above the band rating, discuss it with UEC before fixing the size.

Which seat should I choose for a Series 58?

DelVal offers EPDM, Buna-N and FKM seats on this series. As a general rule EPDM suits water and many aqueous services, Buna-N suits oils and fuels, and FKM is used for more aggressive chemicals or hotter service; share the medium and temperature for a firm recommendation.

How do I get a price for a Series 58 valve?

Send UEC the size, pressure class, body, disc and seat materials, flange standard and how the valve is to be operated. The price depends on all of these, so UEC quotes once they are known rather than publishing a list.

DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.

bottom of page