top of page

DelVal · Authorised dealer

DelVal Series 2E Electric Actuator

The DelVal Series 2E is an electric quarter-turn actuator rated from 885 to 26,550 inch/lbs (100 to 3000 Nm), made to mount directly on DelVal valves, with a handwheel override, space heater and two auxiliary limit switches as standard.

Authorised DelVal dealer · Mumbai · Since 1969

Rated torque
885 to 26,550 inch/lbs (100 to 3000 Nm)
Manual override
Handwheel standard on all units
Standard extras
Space heater, two auxiliary limit switches
Mounting
Direct mount to DelVal valves

Overview

Series 2E turns a ball or butterfly valve through its quarter turn with an electric motor and gear train, so no compressed air is needed at the valve. DelVal rates the range from 885 to 26,550 inch/lbs (100 to 3000 Nm), which spans small isolation valves up to fairly large butterfly valves.

Several items that are often extras come fitted on every unit. Each actuator has a manual override with a handwheel for operation during commissioning or a power cut, a space heater to limit condensation inside the housing, and two auxiliary limit switches for position signals. The internal parts are modular, and the actuator is designed to mount directly on DelVal valves, which keeps a valve and actuator package simple to assemble. Supply voltage and enclosure rating are not published at series level; UEC confirms them for the chosen model.

Specifications

Specifications
TypeElectric, quarter-turn
Rated torque885 to 26,550 inch/lbs (100 to 3000 Nm)
MountingDirect mount to DelVal valves
Manual overrideManual override and handwheel standard on all units
Space heaterStandard on all units
Auxiliary limit switchesTwo, standard
Internal componentsModular
Supply voltage, duty rating, enclosureOn request

Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.

Design features

  • Torque range of 885 to 26,550 inch/lbs (100 to 3000 Nm)
  • Mounts directly on DelVal valves
  • Handwheel manual override on every unit
  • Space heater fitted as standard
  • Two auxiliary limit switches included
  • Modular internal parts for simpler servicing

Where it is used

Electric actuators suit sites where running instrument air to every valve is impractical or costly: remote pump houses, water and effluent treatment plants, tank farms, building services and outdoor pipelines. They also fit well where the control system already handles motor feeders and digital signals. The standard handwheel lets operators move the valve locally during commissioning or a power failure, and the two auxiliary switches give open and closed feedback to the control room.

  • Water and wastewater
  • Power generation
  • Chemical process
  • Food and beverage
  • HVAC and building services
  • Mining

Before you order

State the power supply and control signal

Voltage, phase and frequency are not published at series level, so give UEC the supply available at the valve and whether the actuator is to run open/close or take a positioning signal. The correct model and its electrical ratings are then confirmed in writing with the quotation.

Allow a torque margin for the valve

Choose a model whose rated torque comfortably exceeds the valve's breakaway torque for the actual seat material, pressure and medium. With a range from 100 to 3000 Nm, the right frame depends on valve type and size, so share the valve data with the enquiry.

Check operating time and site conditions

Electric actuators generally stroke more slowly than pneumatic ones, so confirm the operating time your process allows. Note whether the unit is indoors or outdoors and whether the area is classified, because enclosure and certification needs follow from that, and no certificate is listed on the Series 2E page.

How to order from UEC

Send the details

Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.

We confirm and quote

UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.

Supply and documents

Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.

Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in

Questions buyers ask

What torque range does the DelVal Series 2E cover?

DelVal rates the Series 2E from 885 to 26,550 inch/lbs, which is 100 to 3000 Nm as DelVal states it. The model inside that range is chosen to match the torque of the valve it will operate, with a margin.

Can the Series 2E be operated without power?

Yes. Every Series 2E unit has a manual override with a handwheel as standard, so the valve can be opened or closed by hand during commissioning, maintenance or a power failure. This also lets a valve be set to a safe position before the motor supply is connected.

Does the Series 2E give position feedback?

Two auxiliary limit switches are fitted as standard on all units, which can signal the open and closed positions to a control panel or DCS. If a continuous position signal is required, mention it in the enquiry so the model and options are confirmed.

Can UEC supply a DelVal valve with the Series 2E fitted?

Yes, as a package. The Series 2E is designed for direct mounting on DelVal valves, and pricing for the package depends on the valve size, class and materials together with the actuator model. Supplying both together means the actuator is matched to that valve's torque.

DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.

bottom of page