DelVal · Authorised dealer
DelVal Series 56/57 Wafer and Lug Butterfly Valve
Series 56 (wafer) and Series 57 (lug) are DelVal's resilient seated butterfly valves for higher pressures, rated 285 PSIG (PN 20) from 2″ to 24″ and 230 PSIG (PN 16) from 26″ to 48″.
Authorised DelVal dealer · Mumbai · Since 1969
- Size range
- 2″ to 48″ (DN 50 to 1200)
- Pressure rating
- 2″ to 24″ – 285 PSIG (PN 20)26″ to 48″ – 230 PSIG (PN 16)
- Body style
- Series 56 – WaferSeries 57 – Lug
- Seat
- EPDM, Buna-N, FKM
Overview
The Series 56/57 keeps the familiar elastomer-seated butterfly layout but is rated for a higher line pressure than DelVal's PN 10 and PN 12 resilient seated ranges. The disc is driven by separate upper and lower stems, each engaging it through a square or double-D drive, so no disc screws or taper pins are needed. A heavy-duty bushing takes the forces that line pressure puts on the disc and stem, and Bear-G bearings at the drive and non-drive ends lower friction and keep the stem out of contact with the body.
Material choices are broad: cast iron, ductile iron, carbon steel or stainless steel bodies; discs in nylon-coated or Aroxy-coated ductile iron, CF8M stainless or nickel aluminium bronze (NAB); stems in 410 SS, 17-4 PH or 316 SS; and EPDM, Buna-N or FKM seats. Series 56 is the wafer body and Series 57 the lug body, and both span 2″ to 48″ (DN 50 to 1200).
Specifications
| Body style | Series 56 – Wafer; Series 57 – Lug |
|---|---|
| Body | CI, DI, CS, SS |
| Disc | Nylon coated Ductile Iron, Aroxy Ductile Iron, CF8M, NAB |
| Stem | 410 SS, 17-4 PH, 316 SS |
| Seat | EPDM, Buna-N, FKM |
| Size range | 2″ to 48″ (DN 50 to 1200) |
| Pressure rating | 2″ to 24″ – 285 PSIG (PN 20); 26″ to 48″ – 230 PSIG (PN 16) |
| Design standard | API 609, BS EN 593 |
| Testing standard | API 598, BS EN 12266-1 |
| Body material grades* | ASTM A126 Class B / ASTM A395 60-40-18 / ASTM A216 WCB / ASTM A351 CF8M/CF3M |
| API 609 category* | API 609 CAT A |
Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.
Design features
- Separate upper and lower stems with square or double-D drive; no disc screws or taper pins
- Heavy-duty bushing that absorbs line-pressure loads on the disc and stem
- Bear-G bearings at both stem ends, isolating the stem from the body
- Double moulded O-rings sealing at both the upper and lower stem
- Bi-directional U-cup stem seal
- High-strength disc with polished edge and hubs
- ISO 5211 top plate for actuators, handles and gears
Series in this family
| Series | Body style |
|---|---|
| 56 | Wafer |
| 57 | Lug |
Where it is used
Wafer and lug butterfly valves rated PN 16 to PN 20 are used where a PN 10 valve falls short but the compact length of a wafer or lug body is still wanted. Typical duties include pump discharge isolation, fire and service water networks, high-rise building water and HVAC risers, process cooling water, and coastal or seawater-cooled systems, where the nickel aluminium bronze disc is the usual candidate. DelVal's brochure also lists WRAS and UL 1091 for this series.
- Water supply and pumping
- HVAC and building services
- Power generation
- Steel and process industries
- Desalination and seawater cooling
Before you order
Check the rating at your size
The rating is not uniform across the range. Up to 24″ the valve is rated 285 PSIG (PN 20), but from 26″ to 48″ it drops to 230 PSIG (PN 16). On a PN 20 system above 24″, the valve would sit below the line class, so raise this at enquiry before the size is fixed.
Wafer (56) or lug (57)
A wafer body suits positions where the valve will stay between two flanges for its working life. A lug body is usually preferred next to equipment such as a pump or strainer that will be lifted out for maintenance, since the valve can stay bolted to the remaining flange. Whether a lug valve may hold full rated pressure as an end-of-line valve should be confirmed on DelVal's datasheet.
Certificates DelVal lists
- API 609 (butterfly valves)
- CE PED Module H (ball and butterfly valves)
- API 609 Category A, WRAS and UL 1091 (listed in DelVal's brochure)
How to order from UEC
Send the details
Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.
We confirm and quote
UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.
Supply and documents
Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.
Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in
Questions buyers ask
How is Series 56/57 different from Series 58?
DelVal lists the same pressure ratings, size range, materials and internal features for both. The difference is the body: Series 56 is wafer and Series 57 is lug, while Series 58 has a double flanged body. Choose 56/57 where a short installation length matters and 58 where your piping specification calls for a flanged valve.
Is nickel aluminium bronze available for the disc?
Yes. DelVal lists NAB among the disc materials for this series, next to nylon-coated and Aroxy-coated ductile iron and CF8M stainless steel. NAB is commonly specified for seawater, so if your line carries sea or brackish water, ask for it by name in the enquiry.
What drives the disc if there are no taper pins?
The disc is carried on an upper and a lower stem, and each engages the disc through a square or double-D shape. That form fit transmits torque without screws or pins passing through the disc, which keeps fasteners out of the disc altogether.
Do Series 56/57 valves come with inspection documents?
Valves supplied by UEC come with the manufacturer's test certificates. If your order calls for third-party inspection, UEC can arrange it; name the inspection agency and scope in the enquiry so it is built into the quotation.
Related DelVal products
DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.
