top of page

DelVal · Authorised dealer

DelVal Series 51/53 Large Diameter Butterfly Valve

The Series 51/53 is DelVal's resilient seated butterfly valve for big-bore lines, covering 26″ to 40″ (DN 650 to 1000) at 150 PSIG (PN 10) in a wafer or U-section wafer body.

Authorised DelVal dealer · Mumbai · Since 1969

Size range
26″ to 40″ (DN 650 to 1000)
Pressure rating
150 PSIG (PN 10)
Body style
Series 51 – WaferSeries 53 – U Section Wafer (lugs drilled not tapped)
Seat
EPDM, Buna-N, FKM, Silicone

Overview

At these diameters the disc and stem are heavy and the operating loads are large, and the Series 51/53 is built with that in mind. The stem runs in a heavy-duty bronze sleeve bearing to cut friction and torque, a thick bronze bushing takes the side thrust from the actuator, and a bronze vertical thrust bearing carries the weight of stem and disc so the disc is not displaced. The seat is DelVal's Center-LOK® peroxide-cured design in EPDM, Buna-N, FKM or silicone.

Two body patterns are offered. Series 51 is a plain wafer, while Series 53 is a U-section wafer whose lugs are drilled but not tapped. Bodies are one-piece and epoxy coated, in cast iron, ductile iron or carbon steel, and discs come in nylon-coated or Aroxy-coated ductile iron or CF8M stainless with a hand-polished edge and hubs. Stems are listed in 410 SS, 316 SS and carbon steel to BS 970, and an ISO 5211 top plate takes gearboxes and actuators directly.

Specifications

Specifications
Body styleSeries 51 – Wafer; Series 53 – U Section Wafer (lugs drilled not tapped)
BodyCI, DI, CS
DiscNylon Ductile Iron (NDI), Aroxy Ductile Iron (ADI), CF8M
Stem410 SS, 316 SS, CS BS 970
SeatEPDM, Buna-N, FKM, Silicone
Size range26″ to 40″ (DN 650 to 1000)
Pressure rating150 PSIG (PN 10)
Design standardAPI 609, BS EN 593
Testing standardAPI 598, BS EN 12266-1
Body material grades*ASTM A126 Gr B / ASTM A395 Gr 60-40-18 / ASTM A216 Gr WCB

Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.

Design features

  • Heavy-duty bronze sleeve bearing to lower friction and operating torque
  • Thick bronze bushing that absorbs actuator side thrust
  • Bronze vertical thrust bearing supporting the weight of stem and disc
  • Center-LOK® peroxide-cured seat with double moulded O-ring secondary seals
  • Blow-out proof stem retention and bi-directional U-cup stem seal
  • U-section wafer option (Series 53) with drilled, untapped lugs
  • Heavy-duty one-piece epoxy-coated body with ISO 5211 top plate

Series in this family

Series in this family
SeriesBody style
51Wafer
53U-section wafer (lugs drilled, not tapped)

Where it is used

Large resilient seated butterfly valves are widely used to isolate bulk water flows, where their short face-to-face length and lower weight compared with a gate valve of the same bore make installation easier. Typical locations are pump station suction and delivery headers, raw water intakes, treated water transmission mains, cooling water circuits in power and steel plants, and large irrigation or drainage lines, all within the 150 PSIG (PN 10) rating.

  • Municipal water supply
  • Irrigation and drainage
  • Power generation cooling water
  • Steel and metals
  • Wastewater treatment

Before you order

Series 51 or Series 53

Both are wafer-type valves clamped between flanges. The U-section body of Series 53 adds drilled lugs, giving bolt holes through the valve that can help with alignment and support on large flanges during installation. Because the lugs are not tapped, Series 53 should not be treated as a lug valve that allows one side of the line to be dismantled under pressure.

Operator and torque

Valves of 26″ and above are normally fitted with a gearbox or a powered actuator rather than a lever. Torque depends on the seat material, the differential pressure across the closed disc and the flow velocity, so give these with your enquiry. The bronze bearing arrangement reduces friction, but the actuator still needs a sizing margin.

Certificates DelVal lists

  • API 609 (butterfly valves)
  • ATEX 2014/34/EU (valves and actuators)
  • CE PED Module H (ball and butterfly valves)
  • TR CU 032 certificate and declaration (ball and butterfly valves)

How to order from UEC

Send the details

Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.

We confirm and quote

UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.

Supply and documents

Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.

Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in

Questions buyers ask

What sizes does the Series 51/53 cover?

DelVal's current product page lists 26″ to 40″ (DN 650 to 1000) for Series 51 and 53, at 150 PSIG (PN 10). For lines of 24″ and below, DelVal's Series 50/52 is the comparable resilient seated design, and Series 56/57 and 58 reach 48″ (DN 1200) at higher ratings.

Why does the valve have a vertical thrust bearing?

On a large valve installed with its stem vertical, the combined weight of disc and stem bears down on the lower part of the body. DelVal fits a bronze vertical thrust bearing to carry that load, so the disc is not displaced from its position in the seat.

Can Series 51/53 valves go on drinking water mains?

DelVal's current product page for Series 51/53 does not list a drinking water certificate. If your project needs one, state the approval at enquiry and UEC will check DelVal's documentation for the materials being offered before quoting.

Does UEC keep large diameter DelVal valves in stock?

UEC supplies valves, actuators and fittings from ready stock in Mumbai, but what is on hand in this size range changes, so ask us for current stock. Send the size, body pattern and materials and we will confirm what can be offered.

DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.

bottom of page