top of page

DelVal · Authorised dealer

DelVal Series 21 Pneumatic Rack and Pinion Actuator

The DelVal Series 21 is a pneumatic rack and pinion actuator for quarter-turn valves, built around a hard anodised, extruded aluminium body and listed by DelVal with ATEX 2014-34-EU and SIL3 certification.

Authorised DelVal dealer · Mumbai · Since 1969

Body
Hard anodised, extruded aluminium
Travel stops
Bi-directional, adjustable ± 5º in both open and closed directions
Drive insert
Double D, ISO square, round end keyed
Certifications
ATEX 2014-34-EU, SIL3

Overview

Series 21 turns air pressure on its pistons into the 90-degree rotation a ball or butterfly valve needs, through a rack and pinion gear set. The housing is extruded aluminium with a hard anodised finish, the pinion is a high strength alloy with an ENP coating, and the end cap bolts are stainless steel.

Two details set this series apart. A patented drive insert lets one actuator take a Double D, ISO square or round keyed stem end, so it can be mounted directly on many quarter-turn valve designs without a fabricated coupling. Guide bars inside the pistons make the design inherently blowout proof. External stops allow ± 5º of adjustment at each end of the stroke, so the closed position can be trimmed on site.

Specifications

Specifications
TypePneumatic rack and pinion, quarter-turn
BodyHard anodised, extruded aluminium
PinionHigh strength alloy, ENP coated
End cap boltsStainless steel
Travel stopsBi-directional, adjustable external stops, ± 5º in both open and closed directions
Drive insertPatented insert: Double D, ISO square, round end keyed
PistonGuide bar in pistons, inherently blowout proof
Body material grade*ASTM B221 6063-T6, hard anodised
Design standard*ISO 5211
Testing standard*AWWA-C-540
Mounting*EN ISO 5211 and NAMUR VDI/VDE 3845
Ingress protection*IP68

Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.

Design features

  • Extruded aluminium housing with a hard anodised finish
  • ENP coated pinion in a high strength alloy
  • External travel stops adjustable by ± 5º at open and closed
  • Patented insert accepts Double D, ISO square or round keyed stems
  • Guide bars in the pistons for a blowout proof design

Where it is used

Rack and pinion actuators are the usual choice for automating small and mid-size ball and butterfly valves where compressed air is available, such as on-off isolation in process lines and tank outlets. Series 21 adds two points that matter in plant use: DelVal lists ATEX 2014-34-EU certification for use where an explosive atmosphere may be present, and a SIL3 certificate for safety-instrumented duty. The brochure gives an IP68 rating.

  • Chemical process
  • Pharmaceutical
  • Water and wastewater
  • Oil and gas
  • Food and beverage
  • General plant utilities

Before you order

Size the actuator on valve torque

Output torque is not published on the series page, so the model is selected against the breakaway torque of the valve it will drive, at your minimum available air pressure, with a margin. Send the valve make, series, size, class, seat material and medium, plus the minimum supply pressure at site.

Settle the fail action and accessories

Decide what the valve must do if air is lost: stay where it is, or move to open or closed. That choice decides the actuator configuration. Also list the solenoid valve, limit switch box and any filter regulator you want, since the NAMUR VDI/VDE 3845 pattern allows these to be mounted directly on the actuator.

Check the valve stem and top flange

The drive insert covers Double D, ISO square and round keyed stems, and mounting follows EN ISO 5211. For a retrofit on a valve already in the line, note the top flange code and the stem form and dimensions, so the actuator arrives with the correct insert and no coupling has to be made at site.

Certificates DelVal lists

  • ATEX 2014-34-EU (valves and actuators)
  • SIL3 (Series 21 rack and pinion actuator)
  • CE (ATEX)
  • IP68

How to order from UEC

Send the details

Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.

We confirm and quote

UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.

Supply and documents

Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.

Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in

Questions buyers ask

Which valve stems can the Series 21 drive directly?

DelVal's patented insert accepts Double D, ISO square and round end keyed stems. That lets the actuator mount directly onto many quarter-turn valve designs, including valves from other makers, provided the top flange follows ISO 5211. Share the stem form and flange code and UEC will confirm the insert.

Can the Series 21 be used in a hazardous area?

DelVal lists an ATEX 2014-34-EU certificate covering its valves and actuators, and the brochure lists CE certification. For a classified zone, tell UEC the zone and gas or dust group so that the certificate and the accessories, such as the solenoid valve, are checked against that classification before the order.

Is the Series 21 suitable for safety instrumented functions?

DelVal holds a SIL3 certificate for the Series 21 rack and pinion actuator. The SIL level achieved by a complete loop also depends on the valve, solenoid and switch used with it, so the full assembly should be reviewed by your safety engineer against the certificate data.

How is a Series 21 actuator priced?

The price depends on the actuator size needed for the valve torque, the fail action, and the accessories fitted, as well as on the valve itself when supplied as a package. UEC quotes against those details rather than from a list.

DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.

bottom of page