DelVal · Authorised dealer
DelVal Series 50/52 Resilient Seated Butterfly Valve
Series 50 (wafer) and Series 52 (lug) are DelVal's general-purpose resilient seated butterfly valves for 2″ to 24″ (DN 50 to 600) lines, with Series 5A and 5B offering the same patterns with an alternate stem size.
Authorised DelVal dealer · Mumbai · Since 1969
- Size range
- 2″ to 24″ (DN 50 to 600)
- Pressure rating
- 2″ to 12″ – Class 125, 175 PSIG (PN 12)14″ to 24″ – 150 psi (PN 10)Optional: 2″ to 24″ – 230 (PN 16)
- Seat
- EPDM, White EPDM, Buna-N, White Buna-N, FKM, Silicone
- Body
- CI, DI, CS
Overview
This is DelVal's mainstream elastomer-seated butterfly valve, built around a Center-LOK® peroxide-cured seat and a one-piece stem that drives the disc through an internal double-D connection. Because of that drive, the disc is fixed without pins or screws, and the stem is retained so it cannot blow out yet can still be dismantled easily. Double moulded O-rings act as secondary seals at both stem ends, backed by a bi-directional U-cup stem seal and a heavy-duty acetal bushing.
The one-piece body is epoxy coated and has a neck long enough to clear 2″ of insulation, plus locating holes. Its top plate is drilled twice, to ISO 5211 and to a standard secondary bolt circle, so a wide range of actuators, handles and gears fit directly. Four numbered series share this design: 50 and 52 are the wafer and lug bodies, and 5A and 5B are the same two patterns with an alternate stem size.
Specifications
| Body style | Series 50 – Wafer; Series 52 – Lug; Series 5A – Wafer (Alternate stem size); Series 5B – Lug (Alternate stem size) |
|---|---|
| Body | CI, DI, CS |
| Disc | Nylon coated Ductile Iron, Aroxy Ductile Iron, CF8M |
| Stem | 410 SS, 17-4 PH |
| Seat | EPDM, White EPDM, Buna-N, White Buna-N, FKM, Silicone |
| Size range | 2″ to 24″ (DN 50 to 600) |
| Pressure rating | 2″ to 12″ – Class 125, 175 PSIG (PN 12); 14″ to 24″ – 150 psi (PN 10); Optional: 2″ to 24″ – 230 (PN 16) |
| Design standard | API 609, BS EN 593 |
| Testing standard | API 598, BS EN 12266-1 |
Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.
Design features
- Center-LOK® peroxide-cured elastomer seat
- One-piece stem with internal double-D drive, so no disc pins or screws
- Blow-out proof stem retention that still allows easy dismantling
- Upper and lower secondary seals from double moulded O-rings
- Extended neck that clears 2″ of insulation
- Top plate drilled to ISO 5211 and to a standard secondary bolt circle
- Hand-polished disc edge and hubs
- Epoxy-coated one-piece body with locating holes
Series in this family
| Series | Body style |
|---|---|
| 50 | Wafer |
| 52 | Lug |
| 5A | Wafer (alternate stem size) |
| 5B | Lug (alternate stem size) |
Where it is used
Resilient seated butterfly valves of this kind are standard fittings on water and utility services: raw and treated water, cooling and chilled water, general service water and HVAC circuits. The extended neck suits insulated chilled water lines, and the white EPDM and white Buna-N seats are often requested by food and beverage plants. DelVal lists NSF-61/372 and CRN certificates for this series where drinking water contact or Canadian pressure registration is part of the specification.
- Municipal water supply
- Wastewater treatment
- HVAC and chilled water
- Power and process plant utilities
- Food and beverage
Before you order
Pressure band by size
The standard rating steps with size: 2″ to 12″ valves are Class 125 at 175 PSIG (PN 12), and 14″ to 24″ valves are 150 psi (PN 10). An optional 230 (PN 16) rating is offered across 2″ to 24″. If your line is PN 16, say so in the enquiry so the optional version is quoted rather than the standard one.
Seat elastomer
EPDM is the usual choice for water and many dilute aqueous chemicals but is unsuitable for oils; Buna-N (nitrile) is the common choice for oils and fuels; FKM covers many hydrocarbons and chemicals at higher temperature; silicone is a specialist option. Match the seat to the fluid first, then confirm the temperature limit for that elastomer on DelVal's datasheet.
Certificates DelVal lists
- API 609 (butterfly valves)
- ATEX 2014/34/EU (valves and actuators)
- CRN (Series 50-52 butterfly valves)
- NSF-61/372 (Series 50/52 and 5C/5D butterfly valves)
- CE PED Module H (ball and butterfly valves)
- TR CU 032 certificate and declaration (ball and butterfly valves)
How to order from UEC
Send the details
Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.
We confirm and quote
UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.
Supply and documents
Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.
Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in
Questions buyers ask
What is the difference between Series 50, 52, 5A and 5B?
Series 50 is the wafer body and Series 52 the lug body. Series 5A and 5B are the matching wafer and lug versions built with an alternate stem size, offered by DelVal alongside the standard stem. The seat, disc and body options are listed for the family as a whole.
How much insulation does the neck allow for?
DelVal gives the epoxy-coated body an extended neck that clears 2″ of insulation, so the top plate and operator stay above the lagging on chilled or hot water lines. If your insulation is thicker than 2″, raise it at enquiry so the mounting arrangement can be checked.
Does the Series 50/52 hold a drinking water certificate?
DelVal lists an NSF-61 and 372 certificate covering its Series 50/52 and 5C/5D butterfly valves. Mention any potable water approval your specification requires, and UEC will check the certificate against the seat and disc materials being offered.
Why is there no price list for Series 50/52 valves?
The cost of a resilient seated valve moves with its size, pressure rating, body, disc and seat materials, wafer or lug pattern and the operator fitted. UEC therefore quotes against your line details rather than publishing list prices; send the size and service conditions for a quotation.
Related DelVal products
DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.
