DelVal · Authorised dealer
DelVal Series 44-49 High Performance Double Offset Butterfly Valve
The Series 44-49 is DelVal's double offset (high performance) butterfly valve family: three Class 150 and three Class 300 series in wafer, lug and double flanged bodies, with soft, fire-safe and metal seat options.
Authorised DelVal dealer · Mumbai · Since 1969
- Size range
- Series 44, 45 – 2″ to 48″ (DN 50 to 1200)Series 47, 48 – 2″ to 24″ (DN 50 to 600)Series 46 – 3″ to 48″ (DN 80 to 1200)Series 49 – 3″ to 24″ (DN 80 to 600)
- Pressure rating
- Series 44, 45, 46 – Class 150Series 47, 48, 49 – Class 300
- Body style
- Wafer, Lug, Double Flanged
- Seat
- Ultra, PTFE, RTFE, Metal (SS, Inconel), Firesafe
Overview
A double offset butterfly valve places the stem behind the sealing plane and slightly off the pipe centreline, so the disc swings clear of the seat within the first few degrees of opening instead of rubbing against it through the stroke. In this DelVal family the soft seat is a self-energising flexible lip seal, while the fire-safe metal seat design seals with two points of contact. Listed seats are Ultra, PTFE, RTFE, metal (SS or Inconel) and fire safe, and DelVal states that NACE versions are available.
One-piece CS or SS bodies with an extended neck carry CF8M or CF8 discs on 316 SS, 17-4 PH or XM-19 stems. Much of the detail is at the stem: tangential wedge pins set off the stem centre load the disc connection in compression rather than shear, a retainer clip makes the stem blow-out proof, and Belleville springs live-load the packing under a rocker-shaped gland bridge. A disc stop prevents the disc being turned the wrong way and damaging the seat.
Specifications
| Body style | Wafer, Lug, Double Flanged |
|---|---|
| Body | CS, SS |
| Disc | CF8M, CF8 |
| Stem | 316 SS, 17-4 PH, XM-19 |
| Seat | Ultra, PTFE, RTFE, Metal (SS, Inconel), Firesafe |
| Size range | Series 44, 45 – 2″ to 48″ (DN 50 to 1200); Series 47, 48 – 2″ to 24″ (DN 50 to 600); Series 46 – 3″ to 48″ (DN 80 to 1200); Series 49 – 3″ to 24″ (DN 80 to 600) |
| Pressure rating | Series 44, 45, 46 – Class 150; Series 47, 48, 49 – Class 300 |
| Design standard | API 609 Category B, BS EN 593 |
| Testing standard | API 598, BS EN 12266-1 |
| Versions | Fire safe design and NACE versions available |
| Body material grades* | ASTM A216 Gr WCB / ASTM A351 Gr CF8 / ASTM A351 Gr CF8M |
Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.
Design features
- Soft seat with a self-energising flexible lip seal
- Fire-safe metal seat design with two points of contact
- Tangential wedge pins offset from the stem centre, loaded in compression not shear
- Blow-out proof stem held by a retainer clip
- Pull-down gland packing adjustable without removing the actuator
- Belleville-spring live loading with a rocker-shaped gland bridge
- Bear-X bearing with thermal, chemical and wear resistance
- ISO 5211 top plate and a disc stop against wrong-way rotation
Series in this family
| Series | Pressure rating | Size range |
|---|---|---|
| 44 | Class 150 | 2″ to 48″ (DN 50 to 1200) |
| 45 | Class 150 | 2″ to 48″ (DN 50 to 1200) |
| 46 | Class 150 | 3″ to 48″ (DN 80 to 1200) |
| 47 | Class 300 | 2″ to 24″ (DN 50 to 600) |
| 48 | Class 300 | 2″ to 24″ (DN 50 to 600) |
| 49 | Class 300 | 3″ to 24″ (DN 80 to 600) |
Where it is used
High performance butterfly valves are commonly specified where a resilient seated valve would be outside its limits: higher pressure classes, hotter or harder-wearing media, and duties involving throttling or frequent cycling. Typical services include steam and condensate, hydrocarbons and process gases, and chemical lines needing a PTFE-family seat. The fire-safe seat and NACE versions are relevant to oil, gas and refinery piping, and DelVal lists a SIL3 certificate covering its double and triple offset butterfly valves for safety-instrumented duties.
- Oil and gas
- Refining and petrochemicals
- Power generation
- Chemical processing
- Pulp and paper
Before you order
Class 150 or Class 300, then size
Series 44, 45 and 46 are Class 150; Series 47, 48 and 49 are Class 300. The size ceiling changes with the series, from 48″ (DN 1200) in the Class 150 range to 24″ (DN 600) for Class 300, and Series 46 and 49 start at 3″ (DN 80). Fix the class from your piping specification first, then check the size falls within the chosen series.
Soft, fire-safe or metal seat
Soft seats such as PTFE, RTFE and Ultra generally give tight shutoff at modest torque within the polymer's temperature range. Metal seats in stainless steel or Inconel are chosen for higher temperatures or erosive service, and the fire-safe seat is used where the piping specification requires a fire-tested design. Share the medium and the full temperature range so the seat can be confirmed against DelVal's datasheet.
Certificates DelVal lists
- API 609 (butterfly valves)
- ATEX 2014/34/EU (valves and actuators)
- CE PED Module H (ball and butterfly valves)
- SIL3 (triple and double offset butterfly valves)
- TR CU 032 certificate and declaration (ball and butterfly valves)
How to order from UEC
Send the details
Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.
We confirm and quote
UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.
Supply and documents
Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.
Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in
Questions buyers ask
What separates Series 44, 45 and 46 from Series 47, 48 and 49?
The first three are Class 150 and the last three Class 300. Size limits also differ: Series 44 and 45 run from 2″ to 48″, Series 46 from 3″ to 48″, Series 47 and 48 from 2″ to 24″ and Series 49 from 3″ to 24″. UEC matches the series code to your body style when quoting.
Are fire safe and NACE versions available?
Yes. DelVal states that fire safe design and NACE versions are offered for this family, and the seat list includes a fire-safe option next to metal seats in stainless steel or Inconel. State the fire-test or NACE requirement in your enquiry so the right version is quoted.
Can the gland packing be adjusted with an actuator in place?
Yes. The packing uses a pull-down gland that can be reached without taking the actuator off, and Belleville springs keep it loaded. The rocker-shaped gland bridge evens out unequal tightening of the gland bolts, which helps keep stem leakage down in service.
Does this series carry SIL certification?
DelVal lists a SIL3 certificate for its triple and double offset butterfly valves, which takes in this family. For a safety-instrumented function, the capability of the complete final element also depends on the actuator and accessories, so share the loop requirements along with the valve data.
Related DelVal products
DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.
