DelVal · Authorised dealer
DelVal Series 83 Limit Switch Box
The DelVal Series 83 is a limit switch box, or valve position monitor, that mounts on a quarter-turn actuator via NAMUR and signals valve position, with IP65 as standard and IP67 available.
Authorised DelVal dealer · Mumbai · Since 1969
- Weatherproof
- IP65 as standard / IP67 available
- Mounting
- Namur
- Temperature range
- Standard -20°C to 80°C (-4°F to 176°F)
- Switch type
- Honeywell SPDT mechanical switches as standard
Overview
A limit switch box sits on top of an automated valve and tells the control system whether the valve has actually reached open or closed. The Series 83 has a die cast aluminium body with a powder coated finish and a polycarbonate dome, so the position can also be read by eye at the valve.
Honeywell SPDT mechanical switches are fitted as standard, with inductive and proximity switch options for other signal needs. Two ½" NPT conduit entries are standard, and M20x1.5 or ¾" NPT entries can be specified. The brochure gives a SS316 shaft, SS304 hardware and a glass epoxy circuit board. An explosion proof version is available on request, and DelVal lists an ATEX explosion proof certificate and a SIL3 certificate for the series.
Specifications
| Body type | Limit switch box |
|---|---|
| Body | Aluminium die cast powder coated body, polycarbonate dome |
| Weatherproof | IP65 as standard / IP67 available |
| Conduit entries | (2 qty) ½" NPT as standard; M20x1.5 and ¾" NPT options available |
| Mounting | Namur |
| Temperature range | Standard -20°C to 80°C (-4°F to 176°F) |
| Switch type | Honeywell SPDT mechanical switches as standard; other inductive and proximity switch options available |
| Explosion proof version | Available on request |
| Top cover* | Aluminium |
| Dome indicator* | ABS plastic |
| Shaft* | SS316 |
| Hardware* | SS304 |
| PCB* | Glass epoxy |
| Mounting standard* | Namur VDI/VDE 3845 |
Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.
Design features
- Powder coated die cast aluminium body
- Polycarbonate dome for local position indication
- IP65 as standard, IP67 on request
- Two ½" NPT conduit entries, with M20x1.5 and ¾" NPT options
- Honeywell SPDT mechanical switches, inductive and proximity options
- NAMUR mounting
- Explosion proof version available on request
Where it is used
Position monitors belong on any automated valve whose state the control system must confirm rather than assume. Typical cases are interlocked batch sequences, tank farm transfer routes, firewater and shutdown valves, and dosing lines where a valve left part open causes product loss. The Series 83 can be specified with an explosion proof enclosure for classified areas, and DelVal's SIL3 certificate supports its use on safety-related valves when the loop is designed for it.
- Pharmaceutical
- Chemical process
- Oil and gas
- Water and wastewater
- Food and beverage
- Power generation
Before you order
Choose the switch to suit the control system
Mechanical SPDT switches suit simple open and closed contacts wired into a PLC input card or relay panel. Inductive or proximity sensors are often chosen where there are many cycles or where the control system expects a sensor input. State the signal type your control system takes so that the right switch option is quoted.
Specify enclosure and cable entry
IP65 is standard and IP67 is available for wetter or wash-down locations. In a hazardous area, ask for the explosion proof version and give the zone classification. Confirm the cable gland thread your site uses: ½" NPT is standard, with M20x1.5 and ¾" NPT as options.
Check the ambient temperature
The standard range is -20°C to 80°C. If the valve sits near hot equipment such as steam lines or furnaces, or in cold storage, check the expected ambient against that range and raise it in the enquiry before the switch box is ordered.
Certificates DelVal lists
- ATEX explosion proof (limit switch box)
- SIL3 (Series 83 valve position monitor)
How to order from UEC
Send the details
Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.
We confirm and quote
UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.
Supply and documents
Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.
Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in
Questions buyers ask
What IP rating does the DelVal Series 83 have?
The Series 83 is IP65 as standard, and IP67 is available. Mention IP67 at the enquiry stage if the switch box will be exposed to heavy wash-down or temporary immersion, since the enclosure option is set when the unit is ordered.
Which cable entries does the Series 83 have?
It has two ½" NPT conduit entries as standard. M20x1.5 and ¾" NPT entries are available as options, which avoids thread adaptors when your site uses metric glands. State the gland thread with the order.
Is there an explosion proof Series 83?
Yes, an explosion proof version is available on request, and DelVal lists an ATEX explosion proof certificate for its limit switch box. Give the area classification with your enquiry so the correct version is supplied.
Will the Series 83 fit my existing actuator?
The Series 83 uses NAMUR mounting (VDI/VDE 3845 in the brochure), the common accessory interface on pneumatic quarter-turn actuators, including the DelVal Series 21. Share the actuator make and model and UEC will confirm the mounting kit.
Related DelVal products
DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.
