DelVal · Authorised dealer
DelVal Series 64 Three-Piece Ball Valve
The DelVal Series 64 is a three-piece ball valve with threaded or socket weld ends, sized 1/2″ to 2″ and rated Class 400 to Class 800 (1000 psi to 2000 psi).
Authorised DelVal dealer · Mumbai · Since 1969
- Size range
- 1/2″ to 2″
- Pressure rating
- Class 400 to Class 800 (1000 psi to 2000 psi)
- Body type
- Threaded / Socket Weld End
- Design standard
- BS EN 17292
Overview
The Series 64 body is made in three parts: two end caps that connect to the pipe and a centre section that holds the ball and seats. Body bolts tie the three together, so once they are removed the centre section can be lifted out while the end caps stay in the line. That is the practical reason buyers choose a three-piece valve, particularly where the ends are socket welded and cutting the valve out would mean hot work.
DelVal offers the body in carbon steel or stainless steel, with a stainless steel ball and stem and seats in PTFE or RTFE. The pressure rating runs from Class 400 to Class 800, expressed by DelVal as 1000 psi to 2000 psi, across sizes from 1/2″ to 2″. The design standard is BS EN 17292 and testing follows API 598.
Specifications
| Body type | Threaded / Socket Weld End |
|---|---|
| Body | CS, SS |
| Ball | SS |
| Stem | SS |
| Seat | PTFE, RTFE |
| Size range | 1/2″ to 2″ |
| Pressure rating | Class 400 to Class 800 (1000 psi to 2000 psi) |
| Design standard | BS EN 17292 |
| Testing standard | API 598 |
| Body material grades* | ASTM A216 WCB / WCC, ASTM A352 LCB / LCC, ASTM A351 CF8 / CF8M |
| End connection* | Threaded ASME B1.20.1 / Socket Weld ASME B16.11 |
Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.
Design features
- Three-piece body with a removable centre section
- Threaded ends to ASME B1.20.1 or socket weld ends to ASME B16.11
- Carbon steel or stainless steel body
- Stainless steel ball and stem
- PTFE or RTFE seats
- Rated Class 400 to Class 800 (1000 psi to 2000 psi)
- Designed to BS EN 17292 and tested to API 598
Where it is used
Three-piece ball valves are common on small-bore process and utility piping where a valve has to be serviced without disturbing welded pipe ends. DelVal's brochure data for this series lists chemical, petrochemical, oil and gas production, steam and hot gas, water and waste water, pharmaceutical and fire safe applications. Typical uses are reactor and vessel isolation, utility headers, drain and vent points, and skid-mounted pipework where maintenance access is limited.
- Chemicals
- Petrochemicals
- Oil and gas production
- Pharmaceuticals
- Water and waste water
- Steam and hot gas utilities
Before you order
Threaded or socket weld ends
Threaded ends allow the valve to be fitted and removed without welding, which suits lower-hazard utility lines. Socket weld ends make a joint that is much less prone to leaking under vibration or thermal cycling, and with a three-piece body the seats can still be renewed after welding. Take the centre section out before welding the end caps so heat does not damage the soft seats.
PTFE or RTFE seat
Plain PTFE seals well at low operating torque and resists most chemicals. RTFE, a reinforced PTFE, holds its shape better as pressure and temperature rise and is less prone to cold flow. Give the medium, pressure and temperature on your enquiry so the seat can be checked against the datasheet ratings.
Pressure class
The range spans Class 400 to Class 800, which DelVal also states as 1000 psi to 2000 psi. Specify the class your piping specification requires rather than only a working pressure, so the quoted valve matches the line class. At elevated temperatures the allowable pressure falls, so give both figures.
Certificates DelVal lists
- NSF-61 and 372 (certificate names Series 64)
- CE PED Module H
- TR CU 032 (EAC)
- API 607 fire safe certified
How to order from UEC
Send the details
Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.
We confirm and quote
UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.
Supply and documents
Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.
Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in
Questions buyers ask
Can the seats be replaced without cutting the valve out?
Yes, that is the purpose of the three-piece body. Removing the body bolts frees the centre section, which can then be taken out for seat and seal renewal while the threaded or socket welded end caps remain attached to the pipe. Isolate and depressurise the line first.
Which standard is the Series 64 designed to?
DelVal designs the Series 64 to BS EN 17292 and tests it to API 598. If your project specification names a different design code, raise it at enquiry so compliance can be checked against DelVal's documents before an order is placed.
Is the Series 64 suitable for drinking water?
DelVal lists an NSF-61 and 372 certificate that names Series 64 among its ball valves. NSF/ANSI 61 covers the health effects of components in contact with drinking water and 372 covers lead content. Confirm on the enquiry that the materials ordered are the ones covered.
What body materials are offered?
DelVal's page lists carbon steel and stainless steel. Its brochure data names ASTM A216 WCB and WCC, ASTM A352 LCB and LCC for low-temperature duty, and ASTM A351 CF8 and CF8M stainless grades. Choose the grade by the medium and the minimum design temperature of the line.
What decides the price of a Series 64 valve?
Price is set by the size, the pressure class, the body, ball and seat materials, threaded or socket weld ends, and any actuator or lever. UEC does not publish a price list; it quotes once those details are known.
DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.
