top of page

DelVal · Authorised dealer

DelVal Series 42/43 Lined Butterfly Valve

DelVal's Series 42 (wafer) and 43 (lug) are lined butterfly valves for corrosive service, with PTFE, PFA or UHMWPE seat faces and lined or coated discs, from 2″ to 24″ (DN 50 to 600) at 150 PSIG (PN 10).

Authorised DelVal dealer · Mumbai · Since 1969

Size range
2″ to 24″ (DN 50 to 600)
Pressure rating
150 PSIG (PN 10)
Seat
PTFE/Silicone, PTFE/FKM, PFA/Silicone, PFA/FKM, UHMWPE/FKM
Body
DI, CS, SS

Overview

What sets the Series 42/43 apart is the range of wetted-material combinations. The seat is a precision-machined fluoropolymer liner, at least 3mm thick in its PTFE and PFA forms, backed by a silicone or FKM energiser that runs right round the seat, including the zone around the disc hubs. The one-piece disc and stem comes either in 316 or duplex stainless steel with a thin profile and hand-polished edge and hubs, or encapsulated in PTFE or PFA at a minimum of 3mm, and UHMWPE lined and Halar coated discs are also listed.

Around this wetted core sits a heavy-duty, two-piece, epoxy-coated body in ductile iron, carbon steel or stainless steel, with an extended neck and locating holes. Stem sealing combines a bi-directional U-cup seal with sets of Belleville spring washers that live-load the seals on the upper and lower stem, and a heavy-duty acetal bushing guides the stem. An ISO 5211 top plate accepts actuators, handles and gears directly.

Specifications

Specifications
Body styleSeries 42 – Wafer; Series 43 – Lug
BodyDI, CS, SS
Disc/stem316 SS, Duplex SS, PTFE Lined, PFA Lined, UHMWPE Lined, Halar® Coated
SeatPTFE/Silicone, PTFE/FKM, PFA/Silicone, PFA/FKM, UHMWPE/FKM
Size range2″ to 24″ (DN 50 to 600)
Pressure rating150 PSIG (PN 10)
Design standardAPI 609, BS EN 593
Testing standardAPI 598, BS EN 12266-1
Body material grades*ASTM A395 Gr 60-40-18 / ASTM A216 Gr WCB / ASTM A351 Gr CF8M

Specifications as published by DelVal Flow Controls, checked on 22 Nov 2026. Rows marked * are from DelVal's brochure. UEC confirms every order against the current DelVal datasheet.

Design features

  • Seat liner in PTFE, PFA or UHMWPE over a silicone or FKM energiser
  • Energiser runs right round the seat, including the disc hub area
  • Precision-machined PTFE/PFA seat, 3mm minimum thickness
  • One-piece disc/stem: polished thin-profile SS316, or PTFE/PFA encapsulated at 3mm minimum
  • Belleville spring washers live-load the stem seals at upper and lower stem
  • Bi-directional U-cup stem seal and heavy-duty acetal bushing
  • Two-piece epoxy-coated body with extended neck and locating holes
  • ISO 5211 top plate for direct mounting of actuators, handles and gears

Series in this family

Series in this family
SeriesBody style
42Wafer
43Lug

Where it is used

Fully lined butterfly valves are typically used where both the seat and the disc must withstand the process fluid, as with mineral acids, chlorine-bearing chemicals, solvents and high-purity streams. Choosing an encapsulated disc keeps the disc metal away from the medium, which is why valves of this type appear on chemical transfer, dosing and storage-tank lines. UHMWPE is commonly considered where abrasion, rather than chemical attack, is the main concern. DelVal also lists an NSF-61/372 certificate covering its Series 40-43 lined valves.

  • Chemical and petrochemical
  • Agrochemicals and fertilisers
  • Pharmaceutical and fine chemicals
  • Chlor-alkali
  • Mineral and slurry handling

Before you order

Liner material

PTFE and PFA are both fluoropolymers with broad chemical resistance; PFA is a melt-processable relative of PTFE and is often preferred where a smoother, less permeable surface matters. UHMWPE is usually picked for abrasive duty rather than strong chemicals. Give us the fluid, concentration, temperature and any solids content so the liner can be checked against DelVal's datasheet.

Disc: stainless or encapsulated

A polished 316 or duplex stainless disc gives a thinner profile in the flow, while a PTFE or PFA encapsulated disc isolates the metal from the medium. Where the fluid would attack stainless steel, specify an encapsulated, UHMWPE lined or Halar coated disc rather than relying on the seat alone.

Certificates DelVal lists

  • API 609 (butterfly valves)
  • ATEX 2014/34/EU (valves and actuators)
  • NSF-61/372 (certificate names the Series 40-43 lined butterfly valves)
  • CE PED Module H (ball and butterfly valves)
  • TR CU 032 certificate and declaration (ball and butterfly valves)

How to order from UEC

Send the details

Tell us the DelVal series, size, pressure class, body, disc or ball and seat materials, end connection, the medium and its temperature, the quantity and whether you need an actuator.

We confirm and quote

UEC checks the specification against DelVal's datasheet and sends a quotation. Ask for current stock of the size you need.

Supply and documents

Orders are supplied from Mumbai across India and worldwide, with the manufacturer's test certificates. Third-party inspection can be arranged when the order requires it.

Call +91 92244 48436WhatsApp +91 92244 48436united@unitedengg.co.in

Questions buyers ask

Which seat combinations can be ordered on the Series 42/43?

DelVal lists five: PTFE with a silicone backing, PTFE with FKM, PFA with silicone, PFA with FKM, and UHMWPE with FKM. The first-named material faces the process fluid and the second is the energiser behind it, so both need to suit the operating conditions.

Why does the stem have Belleville washers?

Seals tend to relax with time and temperature cycling. Belleville spring washers keep a steady load on the stem seals at the top and bottom of the stem, which helps them stay tight without frequent attention, a useful property on lines carrying chemicals that must not leak to atmosphere.

Is a cast iron body available on this series?

No cast iron option is listed; DelVal offers ductile iron, carbon steel and stainless steel bodies for Series 42/43. If a cast iron body is required, the Series 40/41 split body lined valve lists one, though with a narrower choice of seat and disc materials.

What should a Series 42/43 enquiry include?

Send the size, wafer or lug pattern, the fluid and its concentration, operating pressure and temperature, and the operator you want: lever, gearbox or actuator. With that, UEC can propose a liner, energiser and disc combination and confirm current stock.

DelVal is a trademark of DelVal Flow Controls. UNITED Engineering Corporation is an authorised DelVal dealer.

bottom of page